aerolist.aero
216 active items
Maintenance Services
Item Id: WFV3P
Borescope inspection report and NDT records for offered HPT blade set. Vendor facility; documentation to be provided electronically prior to purchase decision.
Added to platform:
Maintenance Services
Item Id: CXDDC
International shipment and customs clearance for HPT blade set and FMU exchange unit. Freight forwarder to coordinate door to door delivery to buyer's designated receiving warehouse.
Added to platform:
Maintenance Services
Item Id: CC3RD
Special installation tooling kit for fuel metering unit exchange. Tooling loan or purchase quote requested only; not applicable location.
Added to platform:
Parts & Rotables
Item Id: 7GDJK
Looking to acquire a functional wheel bearing puller kit for routine landing gear maintenance work. Calibration current preferred. Short-term lease preferred; will consider outright purchase if price is right.
Added to platform:
Parts & Rotables
Item Id: 7JCHD
In need of a reliable chemical oxygen generator to replace an expiring unit. Must include current certification and clear compliance history. Please include lot number and expiration date documentation with any offer.
Added to platform:
Maintenance Services
Item Id: A9EGF
Bench functional test and certification of hydraulic motor driven pump prior to shipment. Vendor test bench facility; results and cert paperwork to accompany unit.
Added to platform:
Parts & Rotables
Item Id: 3HWYD
We need a dependable hydraulic pump, ready to install, to support scheduled maintenance turnaround. Quick logistics and clean paperwork preferred. Need this within the next two weeks to support an AOG situation—prompt communication appreciated.
Added to platform:
Parts & Rotables
Item Id: KERN9
Traceable replacement material required for Bell 412 hydraulic system failure.
Added to platform:
Maintenance Services
Item Id: 7PGQG
Qualified technical support required for Bell 412 hydraulic system failure.
Added to platform:
Maintenance Services
Item Id: 3C4UM
Marketplace sourcing support for serviceable 737 NG window heat control units; provide available stock, trace, condition, and commercial quote.
Added to platform:
Maintenance Services
Item Id: FKKQW
Marketplace sourcing support for serviceable 737 NG pack flow control valve units; provide traceable inventory options and commercial quote.
Added to platform:
Maintenance Services
Item Id: PAART
Marketplace sourcing support for common 737 NG rotables; provide traceable options, stock status, and commercial quote.
Added to platform:
Parts & Rotables
Item Id: 7GFRC
Serviceable starter generator for Boeing 737 NG inventory replenishment; acceptable OH/SV condition with trace.
Added to platform:
Maintenance Services
Item Id: A3GMX
Marketplace sourcing assistance for serviceable 737 NG APU generator units; provide traceable supply options and commercial terms.
Added to platform:
Maintenance Services
Item Id: PGAQF
Onsite pressurization system diagnosis, pneumatic leak check, valve/controller assessment, and documented findings.
Added to platform:
Parts & Rotables
Item Id: ERW9N
Citation Latitude cabin pressure outflow valve, inspected and serviceable with traceability.
Added to platform:
Parts & Rotables
Item Id: APTP3
Cabin pressure controller compatible with Citation Latitude, serviceable with OEM trace.
Added to platform:
Parts & Rotables
Item Id: R4TF7
Primary heat exchanger or compatible pack valve assembly, serviceable and traceable for Citation Latitude.
Added to platform:
Parts & Rotables
Item Id: Q4VJU
Cabin pressure safety valve, inspected and serviceable for Citation Latitude with OEM trace.
Added to platform:
Parts & Rotables
Item Id: TNQDQ
Traceable replacement material required for Citation hydraulic pressure loss.
Added to platform:
Maintenance Services
Item Id: VND7D
Qualified technical support required for Citation hydraulic pressure loss.
Added to platform:
Aircraft
Item Id: M9FJU
Sikorsky S-76 rotary-wing aircraft wanted for a Development acquisition scenario.
Added to platform:
Tooling, Fixtures, & TMDE
Item Id: PFKJK
Portable data loader with current nav database for 737NG FMC load
Added to platform:
Parts & Rotables
Item Id: M7KKK
Left CDU, blank display, replacement required
Added to platform:
Maintenance Services
Item Id: CAFA7
A&P with avionics experience to remove/install FMC and CDU, load nav database, complete ops test and RTS paperwork at KMDW
Added to platform:
Parts & Rotables
Item Id: H4CM4
Replacement FMC for 737NG, latest software load acceptable
Added to platform:
Parts & Rotables
Item Id: UPCGA
New seal, O-ring, and gasket kit for HMU and engine-driven fuel pump installation, packaged for AOG use.
Added to platform:
Parts & Rotables
Item Id: WRG4F
Engine-driven fuel pump suitable for the CFM56-7B number 2 engine, inspected and preserved for installation.
Added to platform:
Parts & Rotables
Item Id: 7RXHR
Hydromechanical unit compatible with CFM56-7B number 2 engine, inspected for fuel metering performance and ready for installation.
Added to platform:
Maintenance Services
Item Id: 4MG4M
Provide an FAA A&P mechanic with CFM56-7B experience for number 2 engine fuel system troubleshooting, HMU and pump replacement, leak inspection, and return-to-service support.
Added to platform:
Testing & Certification
Item Id: AQJ9P
NDT eddy-current inspection team wanted; provider must state availability, location, qualifications, and estimated response time.
Added to platform:
Maintenance Services
Item Id: JEKKA
Seats, panels, and lavatory items across 3 night shifts
Added to platform:
Parts & Rotables
Item Id: XYVC7
Two MLG carbon brake assemblies, overhauled
Added to platform:
GSE & Ramp Services
Item Id: GUVVJ
Tractor and operator for hangar in/out moves, 3 nights
Added to platform:
Maintenance Services
Item Id: CXTQ9
Level II NDT for structural inspection items in the B-check package
Added to platform:
Parts & Rotables
Item Id: UHCNA
Two MLG wheel and tire assemblies, built up and serviceable
Added to platform:
Tooling, Fixtures, & TMDE
Item Id: ETVTA
Blade retainer and lock tooling, rental acceptable
Added to platform:
Parts & Rotables
Item Id: PXWRN
Two fan blades, moment-weight data required for balance
Added to platform:
Maintenance Services
Item Id: GQQVW
HPC and HPT borescope per AMM bird strike task, report with images
Added to platform:
Maintenance Services
Item Id: NQWRQ
Remove/install two fan blades, blade lube, fan trim balance run
Added to platform:
Parts & Rotables
Item Id: WXDVM
Serviceable A320 main landing gear wheel and tire assembly for planned B Check replacement; include inspection status and trace.
Added to platform:
Maintenance Services
Item Id: QKMXC
Provide licensed A320 maintenance personnel for planned B Check inspections, task card closeout, and engine-area support as scheduled.
Added to platform:
Maintenance Services
Item Id: T9UPX
Provide qualified NDT technicians and equipment for planned A320 B Check inspections, including eddy current and dye penetrant tasks as required by work package.
Added to platform:
Maintenance Services
Item Id: CM9X9
Provide qualified A320 maintenance labor for planned B Check package, including heavy check support, inspections, and sheet metal rectification as required.
Added to platform:
Aircraft
Item Id: 4CJKN
Bombardier Challenger 350 business jet wanted for a Development acquisition scenario.
Added to platform:
Parts & Rotables
Item Id: 3QWJR
Serviceable Mode S transponder for Gulfstream G650; provide operational test results, configuration data, and trace.
Added to platform:
Maintenance Services
Item Id: NM99R
Qualified avionics test team to perform TCAS/Mode S operational test, antenna and transponder verification, traffic display validation, and return-to-service documentation.
Added to platform:
Parts & Rotables
Item Id: EJFKK
Serviceable directional TCAS antenna assembly for Gulfstream G650; include inspection report and connector protection.
Added to platform:
Parts & Rotables
Item Id: MVNDK
Serviceable TCAS processor compatible with Gulfstream G650 traffic collision avoidance system; include bench test report and trace.
Added to platform:
Testing & Certification
Item Id: KX739
Perform bench test of the removed Collins WXR-2100 type receiver/transmitter, document findings, and provide FAA Form 8130-3 or equivalent approved certification package.
Added to platform:
Parts & Rotables
Item Id: XTGWP
Serviceable antenna drive unit for Collins WXR-2100 type weather radar, bench checked and preserved for installation.
Added to platform:
Parts & Rotables
Item Id: FKJW7
Serviceable weather radar receiver/transmitter compatible with the Collins WXR-2100 system, inspected and preserved for installation.
Added to platform:
Maintenance Services
Item Id: MWPQV
Provide an FAA A&P technician with 737-800 avionics experience for onsite WXR-2100 troubleshooting, component replacement, wiring inspection, and return-to-service operational testing.
Added to platform:
Other Services
Item Id: 4NMGC
Aircraft ferry crew wanted; provider must state availability, location, qualifications, and estimated response time.
Added to platform:
Parts & Rotables
Item Id: MC49F
New engine igniter plug for CFM56-7B.
Added to platform:
Maintenance Services
Item Id: UEE9P
Licensed maintenance personnel for scheduled C-check work packages.
Added to platform:
Parts & Rotables
Item Id: XMKNJ
Overhauled fuel nozzle assembly with release certificate.
Added to platform:
Parts & Rotables
Item Id: 9HVM9
Complete landing gear seal kit with batch trace.
Added to platform:
Maintenance Services
Item Id: XTFYH
B2 avionics technicians for fault isolation and operational testing.
Added to platform:
Parts & Rotables
Item Id: WEY49
Replacement hydraulic filter module for scheduled maintenance.
Added to platform:
Maintenance Services
Item Id: 74VRW
Qualified composite repair personnel with portable tooling.
Added to platform:
Aircraft
Item Id: AJQPF
Cessna Citation XLS acquisition requirement; Development test listing.
Added to platform:
Maintenance Services
Item Id: XYGJD
Qualified technical support required for Citation cabin-pressure inspection.
Added to platform:
Parts & Rotables
Item Id: EFUJF
Traceable replacement material required for Citation cabin-pressure inspection.
Added to platform:
Maintenance Services
Item Id: FVFQK
Pre-purchase aircraft inspection wanted; provider must state availability, location, qualifications, and estimated response time.
Added to platform:
Parts & Rotables
Item Id: HGXNU
Hydraulic filter manifold and compatible filter elements, serviceable and traceable for Challenger 350.
Added to platform:
Parts & Rotables
Item Id: NPFFE
Hydraulic reservoir assembly, inspected and serviceable with OEM traceability for Challenger 350.
Added to platform:
Parts & Rotables
Item Id: HDUJW
Hydraulic accumulator assembly, inspected and serviceable with OEM traceability for Challenger 350.
Added to platform:
Parts & Rotables
Item Id: TXWFC
Engine-driven hydraulic pump assembly, inspected and serviceable with traceability for Challenger 350.
Added to platform:
Maintenance Services
Item Id: 3RMKK
Onsite hydraulic leak isolation, component assessment, servicing, and controlled ground run support with documented findings.
Added to platform:
Aircraft
Item Id: QWDEN
Sikorsky S-92 acquisition requirement; Development test listing.
Added to platform:
Maintenance Services
Item Id: TM3TM
On-wing borescope inspection focused on the lubrication system and accessible bearing compartments.
Added to platform:
Parts & Rotables
Item Id: 7FWUC
Serviceable engine oil pressure transmitter with trace and authorized release certificate.
Added to platform:
Testing & Certification
Item Id: PWN7W
Expedited spectrometric and ferrographic oil debris analysis with certified report.
Added to platform:
Parts & Rotables
Item Id: JXYWY
New oil filter elements in sealed packaging with batch documentation.
Added to platform:
Parts & Rotables
Item Id: T4TTP
Overhauled lubrication pump assembly with test report and full back-to-birth trace.
Added to platform:
Tooling, Fixtures, & TMDE
Item Id: T7MTX
Calibrated pressure test kit with adapters required for GE90 lubrication troubleshooting.
Added to platform:
Maintenance Services
Item Id: 7WPX9
On-aircraft electrical load analysis and fault isolation by qualified technicians.
Added to platform:
Parts & Rotables
Item Id: 39EY7
Serviceable generator control unit with test certification and complete trace.
Added to platform:
Parts & Rotables
Item Id: UNEDY
Overhauled starter generator available for immediate dispatch with release documentation.
Added to platform:
Testing & Certification
Item Id: QT3NU
Continuity, insulation resistance, and connector inspection with certified findings report.
Added to platform:
Maintenance Services
Item Id: PWYEG
Business jet exterior paint slot wanted; provider must state availability, location, qualifications, and estimated response time.
Added to platform:
Maintenance Services
Item Id: AHVQJ
CFM56-7B borescope inspection and condition report.
Added to platform:
Parts & Rotables
Item Id: PYMGK
Serviceable flight-control actuator with trace documentation.
Added to platform:
Parts & Rotables
Item Id: PFACM
Overhauled hydraulic pump assembly suitable for 737NG installation.
Added to platform:
Parts & Rotables
Item Id: 3JWXU
Tested brake control unit with authorized release documentation.
Added to platform:
Maintenance Services
Item Id: FUKMV
On-wing nondestructive inspection with documented findings.
Added to platform:
Parts & Rotables
Item Id: WXA3G
Serviceable integrated drive generator for CFM56-7B application.
Added to platform:
Maintenance Services
Item Id: XU7M3
Qualified mobile maintenance team for immediate aircraft recovery.
Added to platform:
Logistics & Customs
Item Id: NE49Q
International AOG logistics support wanted; provider must state availability, location, qualifications, and estimated response time.
Added to platform:
Parts & Rotables
Item Id: H34YT
New connector gaskets, lockwire, and hardware kit for EEC replacement on PW1100G-JM.
Added to platform:
Parts & Rotables
Item Id: YMQQW
Serviceable EEC for PW1100G-JM with current software standard, preserved for installation.
Added to platform:
Maintenance Services
Item Id: A9MXU
Provide an FAA A&P mechanic with PW1100G-JM experience for EEC replacement, software load, FADEC checks, and return-to-service engine run.
Added to platform:
GSE & Ramp Services
Item Id: R7XAJ
Provide run-up area coordination, fire guard, and GSE for the post-maintenance engine ground run after EEC replacement.
Added to platform:
Parts & Rotables
Item Id: EG4HR
Thrust reverser actuator, inspected and serviceable for Falcon 7X.
Added to platform:
Maintenance Services
Item Id: NPGQJ
Inspect flexible thrust reverser hydraulic hose, replace as required, and perform pressure and leak checks on Falcon 7X.
Added to platform:
Parts & Rotables
Item Id: FRWCH
Thrust reverser control unit and proximity sensor assembly, inspected and serviceable for Falcon 7X.
Added to platform:
Maintenance Services
Item Id: CKH34
Perform thrust reverser rigging check, actuator and proximity indication verification, hydraulic leak check, and operational test.
Added to platform:
Maintenance Services
Item Id: C33UV
Inspect thrust reverser hydraulic isolation valve, verify operation, and support replacement and leak check on Falcon 7X.
Added to platform:
Testing & Certification
Item Id: H3RWU
Qualified technical support required for Hawker windshield heat failure.
Added to platform:
Maintenance Services
Item Id: WA7AF
Qualified technical support required for Hawker windshield heat failure.
Added to platform:
Logistics & Customs
Item Id: AEQ3G
Qualified technical support required for Hawker windshield heat failure.
Added to platform:
Parts & Rotables
Item Id: EUPCN
Traceable replacement material required for Hawker windshield heat failure.
Added to platform:
Aircraft
Item Id: QXXGX
Gulfstream G550 business jet wanted with complete records and no material damage history.
Added to platform:
Parts & Rotables
Item Id: DEKEJ
PFD bezel and display control panel, inspected and serviceable for Phenom 300.
Added to platform:
Parts & Rotables
Item Id: 4RMHT
Symbol generator or display control unit compatible with Phenom 300, serviceable with OEM trace.
Added to platform:
Parts & Rotables
Item Id: YXT7R
Display unit cooling fan and assembly, inspected and serviceable for Phenom 300.
Added to platform:
Parts & Rotables
Item Id: UUDFQ
Primary flight display unit, inspected and serviceable with OEM traceability for Phenom 300.
Added to platform:
Maintenance Services
Item Id: EQKQW
Avionics DU removal and replacement, wiring inspection, software load and configuration verification, and operational test for Phenom 300 PFD failure.
Added to platform:
Aircraft
Item Id: FJVUX
Bombardier Challenger 650 acquisition requirement; Development test listing.
Added to platform:
Maintenance Services
Item Id: PHC3A
Provide an FAA A&P mechanic with PW1100G-JM experience for FOHE replacement, oil servicing, leak check, and engine run.
Added to platform:
Parts & Rotables
Item Id: HCFDM
Serviceable fuel oil heat exchanger for PW1100G-JM, pressure checked and preserved.
Added to platform:
GSE & Ramp Services
Item Id: 7PARV
Provide run-up area coordination, fire guard, and oil servicing cart for the post-maintenance leak check run.
Added to platform:
Parts & Rotables
Item Id: K7HKQ
New packings, seals, and hardware for FOHE replacement on PW1100G-JM.
Added to platform:
Aircraft
Item Id: ARGQC
Bell 407 rotary-wing aircraft wanted for a Development acquisition scenario.
Added to platform:
Maintenance Services
Item Id: U3AFF
Qualified avionics technician to remove and replace ADIRU/IRS as required, perform wiring checks, dual-channel alignment, BITE, and operational test for return to service.
Added to platform:
Parts & Rotables
Item Id: 3FRUA
IRS mounting tray with installation hardware and connector backshell kit for Boeing 737-800 avionics bay.
Added to platform:
Parts & Rotables
Item Id: GUAP4
Serviceable Honeywell-style ADIRU/IRS unit compatible with 737-800 navigation system; provide removal history and trace.
Added to platform:
Parts & Rotables
Item Id: NKRRN
Dual control display unit / CDU for Boeing 737-800 flight management system; serviceable avionics unit with bench test report.
Added to platform:
Logistics & Customs
Item Id: 3UTEF
On-board courier for flight-critical part; provider must state availability, location, qualifications, and estimated response time.
Added to platform:
Testing & Certification
Item Id: UUTCT
Perform borescope inspection of the number 2 engine booster and HPC stages 1 to 3 after bird ingestion, with recorded images and a findings report per CFM56-7B AMM limits.
Added to platform:
Parts & Rotables
Item Id: HCJ4K
Serviceable CFM56-7B fan blades supplied as a moment-weight matched pair with blade weights and records.
Added to platform:
Maintenance Services
Item Id: JYGEQ
Provide an EASA B1 licensed engineer with CFM56-7B experience for fan blade replacement, trim balance if required, engine run, and certificate of release to service.
Added to platform:
Parts & Rotables
Item Id: WQVDM
New fan blade shims, retainers, and dry film lubricant consumables for CFM56-7B fan blade replacement.
Added to platform:
Parts & Rotables
Item Id: HRVX9
APU for 737-800
Added to platform:
Parts & Rotables
Item Id: TCPHF
Traceable replacement material required for Bell 206 fuel-control fault.
Added to platform:
Testing & Certification
Item Id: 9R3TK
Qualified technical support required for Bell 206 fuel-control fault.
Added to platform:
Maintenance Services
Item Id: RWN3K
Qualified technical support required for Bell 206 fuel-control fault.
Added to platform:
Parts & Rotables
Item Id: CKMUF
Traceable replacement material required for H125 rotor vibration.
Added to platform:
Maintenance Services
Item Id: FWRK7
Qualified technical support required for H125 rotor vibration.
Added to platform:
Maintenance Services
Item Id: C9CMA
Provide an FAA A&P technician with 737NG avionics experience for ADIRU removal and installation, connector inspection, IRS alignment, and return-to-service checks.
Added to platform:
Parts & Rotables
Item Id: DG3C7
Serviceable ADIRU compatible with 737NG air data and inertial reference system, BITE clean and preserved for installation.
Added to platform:
Testing & Certification
Item Id: GAV4D
Bench check the removed ADIRU, document fault findings, and return with FAA Form 8130-3 or report findings for repair quote.
Added to platform:
Logistics & Customs
Item Id: PCQW4
Arrange next-flight-out transport of the replacement ADIRU to KSTL with priority handling, live tracking, and tail-side delivery to Gate E28.
Added to platform:
Parts & Rotables
Item Id: NKJHY
New or overhauled main slat track assemblies per the SB post-mod configuration.
Added to platform:
Maintenance Services
Item Id: MAJJP
Provide two FAA A&P mechanics with A320 family experience for slat removal, track replacement, rigging, and functional checks.
Added to platform:
Testing & Certification
Item Id: 74PKN
Perform eddy current inspection of slat 3 and 4 main tracks per the SB, with signed reports and findings for engineering disposition.
Added to platform:
Parts & Rotables
Item Id: PNUF3
New bushings, fasteners, and sealant consumables called out by the SB for slat track replacement.
Added to platform:
Testing & Certification
Item Id: CWK7G
Qualified technical support required for Learjet starter-generator failure.
Added to platform:
Parts & Rotables
Item Id: W4CXD
Traceable replacement material required for Learjet starter-generator failure.
Added to platform:
Maintenance Services
Item Id: YTGFT
Qualified technical support required for Learjet starter-generator failure.
Added to platform:
Parts & Rotables
Item Id: G9GDH
Traceable replacement material required for Hawker avionics reliability check.
Added to platform:
Testing & Certification
Item Id: K7D4W
Qualified technical support required for Hawker avionics reliability check.
Added to platform:
Logistics & Customs
Item Id: VWNYG
Qualified technical support required for Hawker avionics reliability check.
Added to platform:
Maintenance Services
Item Id: 3RUAQ
Qualified technical support required for Hawker avionics reliability check.
Added to platform:
Parts & Rotables
Item Id: T9ECT
Traceable replacement material required for Challenger brake control fault.
Added to platform:
Maintenance Services
Item Id: WYGWU
Qualified technical support required for Challenger brake control fault.
Added to platform:
Logistics & Customs
Item Id: 7V7MR
Transatlantic OBC and customs coordination wanted; provider must state availability, location, qualifications, and estimated response time.
Added to platform:
Parts & Rotables
Item Id: DJ9Y3
Serviceable starter air valve compatible with LEAP-1B pneumatic start system, inspected and preserved.
Added to platform:
Maintenance Services
Item Id: DRXRR
Provide a 737 MAX 8 powerplant mechanic for number 1 engine starter troubleshooting and replacement, starter air valve inspection, leak check, engine motoring, and return-to-service support.
Added to platform:
Parts & Rotables
Item Id: TPYD3
Serviceable pneumatic starter compatible with LEAP-1B, inspected for cutout operation and preserved for installation.
Added to platform:
GSE & Ramp Services
Item Id: PNYYH
Provide ramp coordination and GSE support for engine motoring, starter and air valve functional checks, leak inspection, and controlled engine run-up after maintenance.
Added to platform:
Parts & Rotables
Item Id: AUWA9
New starter mounting gasket, V-band clamp, and associated fasteners packaged for pneumatic starter replacement.
Added to platform:
Maintenance Services
Item Id: 4QWCH
Interior return-to-service inspection wanted; provider must state availability, location, qualifications, and estimated response time.
Added to platform:
GSE & Ramp Services
Item Id: EWNFH
Provide compatible 737-800 tow bar, qualified tug operator, wing walkers, and ramp coordination for aircraft positioning before and after main landing gear exchange.
Added to platform:
Maintenance Services
Item Id: WECTH
Provide a two-person landing gear maintenance crew with 737NG experience to perform gear removal and installation, alignment, functional checks, and maintenance records.
Added to platform:
Tooling, Fixtures, & TMDE
Item Id: YTKWC
Gear jacking beam and tripod jack set sized for 737-800 main landing gear replacement, load tested and ready for use.
Added to platform:
Parts & Rotables
Item Id: CMMPK
Overhauled 737-800 main landing gear shock strut assembly suitable for exchange installation during scheduled gear overhaul.
Added to platform:
Testing & Certification
Item Id: HPXD3
Provide qualified NDT technicians and equipment for visual, eddy current, and fluorescent penetrant inspections of removed and installed main landing gear components.
Added to platform:
Parts & Rotables
Item Id: UFCVU
OH or SV APU starter-generator
Added to platform:
Parts & Rotables
Item Id: GYRQK
OH or SV starter, 8130-3
Added to platform:
Parts & Rotables
Item Id: X4FYW
OH or SV EDP, 8130-3
Added to platform:
Parts & Rotables
Item Id: 749W9
OH or SV IDG, 8130-3
Added to platform:
Parts & Rotables
Item Id: F7AFM
SV built-up main wheel
Added to platform:
Maintenance Services
Item Id: 47ATW
Qualified technical support required for H135 tail-rotor gearbox alert.
Added to platform:
Parts & Rotables
Item Id: HQHPF
Traceable replacement material required for H135 tail-rotor gearbox alert.
Added to platform:
Testing & Certification
Item Id: TGTWC
Qualified technical support required for H135 tail-rotor gearbox alert.
Added to platform:
Logistics & Customs
Item Id: KPQYQ
Qualified technical support required for H135 tail-rotor gearbox alert.
Added to platform:
Maintenance Services
Item Id: HWQ4D
Qualified technical support required for Learjet landing-gear scheduled work.
Added to platform:
Testing & Certification
Item Id: TCHWQ
Qualified technical support required for Learjet landing-gear scheduled work.
Added to platform:
Parts & Rotables
Item Id: AQQ9C
Traceable replacement material required for Learjet landing-gear scheduled work.
Added to platform:
Aircraft
Item Id: 4733J
Gulfstream G700 acquisition requirement; Development test listing.
Added to platform:
Aircraft
Item Id: GT9JW
Bell 429 GlobalRanger acquisition requirement; Development test listing.
Added to platform:
Parts & Rotables
Item Id: TERCW
Replacement oil pressure transmitter to rule out sensor fault
Added to platform:
Parts & Rotables
Item Id: J4VN4
Scavenge oil filter element, qty 2
Added to platform:
Parts & Rotables
Item Id: 97EU7
Replacement MCD, new preferred
Added to platform:
Maintenance Services
Item Id: DX9NJ
Two A&P powerplant techs for filter/MCD inspection, component change, leak check and ground run
Added to platform:
Testing & Certification
Item Id: MXCUJ
Spectrographic and particle analysis of oil sample and MCD debris, written report
Added to platform:
Tooling, Fixtures, & TMDE
Item Id: XMGR9
Provide a 737NG APU hoist kit and cradle with current load certification for APU removal and installation.
Added to platform:
Maintenance Services
Item Id: YRGKV
Provide a three-person FAA A&P crew with 737NG experience for APU removal, installation, leak checks, and APU run.
Added to platform:
Parts & Rotables
Item Id: MDVUT
Overhauled Honeywell 131-9B APU for 737NG, dressed with standard accessories.
Added to platform:
Tooling, Fixtures, & TMDE
Item Id: 4AXGJ
Calibrated mobile hydraulic test stand suitable for G650 system pressure checks.
Added to platform:
Parts & Rotables
Item Id: 4WXQ3
Serviceable hydraulic pump assembly with full trace and current release documentation.
Added to platform:
Parts & Rotables
Item Id: JXW49
Serviceable 737 MAX flight control computer with current software standard, preserved for installation.
Added to platform:
Logistics & Customs
Item Id: 3PUPF
Arrange next-flight-out transport of the FCC to KSJC with priority handling, tracking, and tail-side delivery.
Added to platform:
Maintenance Services
Item Id: 9FJA9
Provide a 737 MAX avionics technician for FCC removal and installation, software load, autopilot and stab trim operational checks.
Added to platform:
GSE & Ramp Services
Item Id: 4D4KM
Mobile GSE package wanted; provider must state availability, location, qualifications, and estimated response time.
Added to platform:
Parts & Rotables
Item Id: AARR3
TEST DATA. Flexible HYD hose assembly, on-wing replace. Wanted new or OH.
Added to platform:
Parts & Rotables
Item Id: ARUCV
TEST DATA. Pressure filter element for HYD system. Prefer OEM.
Added to platform:
Parts & Rotables
Item Id: 37WGN
TEST — Engine-driven hydraulic pump (wanted)
Added to platform:
Parts & Rotables
Item Id: 9MCNH
TEST DATA. Yellow hydraulic system reservoir for A320. Wanted OH/SV with 8130-3.
Added to platform:
Parts & Rotables
Item Id: HWDWW
Serviceable or new TCAS directional antenna with mounting gasket for 777 upper fuselage installation.
Added to platform:
Parts & Rotables
Item Id: 7XWFU
Serviceable TCAS II computer with change 7.1 software for 777 ACAS II installation, preserved for installation.
Added to platform:
Maintenance Services
Item Id: MYKM3
Provide an EASA Part-66 B2 licensed technician with 777 type rating for TCAS computer and antenna replacement, bonding check, TCAS self-check, and CRS issue.
Added to platform:
Parts & Rotables
Item Id: 4KYGY
Serviceable DEU 1 compatible with 737 MAX 8 display system, tested and preserved for installation.
Added to platform:
Parts & Rotables
Item Id: RHFJH
Serviceable LCD display unit compatible with Boeing 737 MAX 8 cockpit display system, tested and preserved.
Added to platform:
Logistics & Customs
Item Id: PNRVC
Arrange expedited next-flight-out transport from supplier to KLAS, including priority handling, tracking, customs coordination as required, and direct delivery to the maintenance facility.
Added to platform:
Maintenance Services
Item Id: PRCKN
Provide a 737 MAX 8 avionics technician for captain-side display electronics removal and installation, wiring inspection, and return-to-service display test.
Added to platform:
Tooling, Fixtures, & TMDE
Item Id: KAAFF
Rental of calibrated wing and nose jacks rated for E190 with load certificates, for gear swing and actuator replacement.
Added to platform:
Testing & Certification
Item Id: WWDMA
Perform eddy current and detailed visual inspection of wing to fuselage attach fittings per the C-check task cards, with signed reports.
Added to platform:
Maintenance Services
Item Id: VV3NQ
Provide four EASA B1 licensed mechanics with ERJ-190 type rating for day and night shifts across the eight-day C-check.
Added to platform:
Parts & Rotables
Item Id: U73D4
Overhauled E190 main landing gear retraction actuator for hard-time replacement during C-check.
Added to platform:
Testing & Certification
Item Id: V9DVG
Perform SB borescope inspection of HPT stage 1 blades on both GEnx-1B engines with image capture and a findings report formatted for GE disposition.
Added to platform:
Tooling, Fixtures, & TMDE
Item Id: QKXV7
Rental of a video borescope with articulating probe and GEnx-1B HPT guide tube set, calibrated and ready for use.
Added to platform:
Maintenance Services
Item Id: MPJEM
Provide two EASA B1 technicians with 787 GEnx type rating for engine access, core turning, cowl closure, and CRS.
Added to platform:
Testing & Certification
Item Id: KWMP9
Composite NDT inspection support wanted; provider must state availability, location, qualifications, and estimated response time.
Added to platform:
Maintenance Services
Item Id: ERTP4
Qualified technical support required for Challenger corrosion inspection.
Added to platform:
Testing & Certification
Item Id: JYNN9
Qualified technical support required for Challenger corrosion inspection.
Added to platform:
Parts & Rotables
Item Id: 99JYY
Traceable replacement material required for Challenger corrosion inspection.
Added to platform:
Parts & Rotables
Item Id: 7EUUH
Traceable replacement material required for Phenom engine trend inspection.
Added to platform:
Maintenance Services
Item Id: ART4M
Qualified technical support required for Phenom engine trend inspection.
Added to platform:
Maintenance Services
Item Id: HRYGK
Need Gulfstream-experienced A&P (prefer G550) at KCAG for fault isolation of rudder restriction. No parts identified yet. Provide troubleshooting labor, tooling, and recommended corrective action / parts after diagnosis. On-site KCAG ASAP / within next 24h Zulu; Hangar or Ramp.
Added to platform:
Tooling, Fixtures, & TMDE
Item Id: CYERP
Ramp test set for Mode S and ADS-B out verification, calibrated, cert copy included
Added to platform:
Maintenance Services
Item Id: XRNMU
Remove/install transponder, run BITE and ADS-B out compliance check, sign RTS at KHOU
Added to platform:
Parts & Rotables
Item Id: QNUQA
Rear connector and tray hardware in case pins are damaged on removal
Added to platform:
Parts & Rotables
Item Id: NPGCN
Replacement ATC transponder with ADS-B out, 737 MAX compatible
Added to platform: