aerolist.aero
101 active items
Maintenance Services
Item Id: WFV3P
Borescope inspection report and NDT records for offered HPT blade set. Vendor facility; documentation to be provided electronically prior to purchase decision.
Added to platform:
Maintenance Services
Item Id: CXDDC
International shipment and customs clearance for HPT blade set and FMU exchange unit. Freight forwarder to coordinate door to door delivery to buyer's designated receiving warehouse.
Added to platform:
Maintenance Services
Item Id: CC3RD
Special installation tooling kit for fuel metering unit exchange. Tooling loan or purchase quote requested only; not applicable location.
Added to platform:
Maintenance Services
Item Id: A9EGF
Bench functional test and certification of hydraulic motor driven pump prior to shipment. Vendor test bench facility; results and cert paperwork to accompany unit.
Added to platform:
Maintenance Services
Item Id: 7PGQG
Qualified technical support required for Bell 412 hydraulic system failure.
Added to platform:
Maintenance Services
Item Id: 3C4UM
Marketplace sourcing support for serviceable 737 NG window heat control units; provide available stock, trace, condition, and commercial quote.
Added to platform:
Maintenance Services
Item Id: FKKQW
Marketplace sourcing support for serviceable 737 NG pack flow control valve units; provide traceable inventory options and commercial quote.
Added to platform:
Maintenance Services
Item Id: PAART
Marketplace sourcing support for common 737 NG rotables; provide traceable options, stock status, and commercial quote.
Added to platform:
Maintenance Services
Item Id: A3GMX
Marketplace sourcing assistance for serviceable 737 NG APU generator units; provide traceable supply options and commercial terms.
Added to platform:
Maintenance Services
Item Id: PGAQF
Onsite pressurization system diagnosis, pneumatic leak check, valve/controller assessment, and documented findings.
Added to platform:
Maintenance Services
Item Id: VND7D
Qualified technical support required for Citation hydraulic pressure loss.
Added to platform:
Maintenance Services
Item Id: CAFA7
A&P with avionics experience to remove/install FMC and CDU, load nav database, complete ops test and RTS paperwork at KMDW
Added to platform:
Maintenance Services
Item Id: 4MG4M
Provide an FAA A&P mechanic with CFM56-7B experience for number 2 engine fuel system troubleshooting, HMU and pump replacement, leak inspection, and return-to-service support.
Added to platform:
Testing & Certification
Item Id: AQJ9P
NDT eddy-current inspection team wanted; provider must state availability, location, qualifications, and estimated response time.
Added to platform:
Maintenance Services
Item Id: JEKKA
Seats, panels, and lavatory items across 3 night shifts
Added to platform:
GSE & Ramp Services
Item Id: GUVVJ
Tractor and operator for hangar in/out moves, 3 nights
Added to platform:
Maintenance Services
Item Id: CXTQ9
Level II NDT for structural inspection items in the B-check package
Added to platform:
Maintenance Services
Item Id: GQQVW
HPC and HPT borescope per AMM bird strike task, report with images
Added to platform:
Maintenance Services
Item Id: NQWRQ
Remove/install two fan blades, blade lube, fan trim balance run
Added to platform:
Maintenance Services
Item Id: QKMXC
Provide licensed A320 maintenance personnel for planned B Check inspections, task card closeout, and engine-area support as scheduled.
Added to platform:
Maintenance Services
Item Id: T9UPX
Provide qualified NDT technicians and equipment for planned A320 B Check inspections, including eddy current and dye penetrant tasks as required by work package.
Added to platform:
Maintenance Services
Item Id: CM9X9
Provide qualified A320 maintenance labor for planned B Check package, including heavy check support, inspections, and sheet metal rectification as required.
Added to platform:
Maintenance Services
Item Id: NM99R
Qualified avionics test team to perform TCAS/Mode S operational test, antenna and transponder verification, traffic display validation, and return-to-service documentation.
Added to platform:
Testing & Certification
Item Id: KX739
Perform bench test of the removed Collins WXR-2100 type receiver/transmitter, document findings, and provide FAA Form 8130-3 or equivalent approved certification package.
Added to platform:
Maintenance Services
Item Id: MWPQV
Provide an FAA A&P technician with 737-800 avionics experience for onsite WXR-2100 troubleshooting, component replacement, wiring inspection, and return-to-service operational testing.
Added to platform:
Other Services
Item Id: 4NMGC
Aircraft ferry crew wanted; provider must state availability, location, qualifications, and estimated response time.
Added to platform:
Maintenance Services
Item Id: UEE9P
Licensed maintenance personnel for scheduled C-check work packages.
Added to platform:
Maintenance Services
Item Id: XTFYH
B2 avionics technicians for fault isolation and operational testing.
Added to platform:
Maintenance Services
Item Id: 74VRW
Qualified composite repair personnel with portable tooling.
Added to platform:
Maintenance Services
Item Id: XYGJD
Qualified technical support required for Citation cabin-pressure inspection.
Added to platform:
Maintenance Services
Item Id: FVFQK
Pre-purchase aircraft inspection wanted; provider must state availability, location, qualifications, and estimated response time.
Added to platform:
Maintenance Services
Item Id: 3RMKK
Onsite hydraulic leak isolation, component assessment, servicing, and controlled ground run support with documented findings.
Added to platform:
Maintenance Services
Item Id: TM3TM
On-wing borescope inspection focused on the lubrication system and accessible bearing compartments.
Added to platform:
Testing & Certification
Item Id: PWN7W
Expedited spectrometric and ferrographic oil debris analysis with certified report.
Added to platform:
Maintenance Services
Item Id: 7WPX9
On-aircraft electrical load analysis and fault isolation by qualified technicians.
Added to platform:
Testing & Certification
Item Id: QT3NU
Continuity, insulation resistance, and connector inspection with certified findings report.
Added to platform:
Maintenance Services
Item Id: PWYEG
Business jet exterior paint slot wanted; provider must state availability, location, qualifications, and estimated response time.
Added to platform:
Maintenance Services
Item Id: AHVQJ
CFM56-7B borescope inspection and condition report.
Added to platform:
Maintenance Services
Item Id: FUKMV
On-wing nondestructive inspection with documented findings.
Added to platform:
Maintenance Services
Item Id: XU7M3
Qualified mobile maintenance team for immediate aircraft recovery.
Added to platform:
Logistics & Customs
Item Id: NE49Q
International AOG logistics support wanted; provider must state availability, location, qualifications, and estimated response time.
Added to platform:
Maintenance Services
Item Id: A9MXU
Provide an FAA A&P mechanic with PW1100G-JM experience for EEC replacement, software load, FADEC checks, and return-to-service engine run.
Added to platform:
GSE & Ramp Services
Item Id: R7XAJ
Provide run-up area coordination, fire guard, and GSE for the post-maintenance engine ground run after EEC replacement.
Added to platform:
Maintenance Services
Item Id: NPGQJ
Inspect flexible thrust reverser hydraulic hose, replace as required, and perform pressure and leak checks on Falcon 7X.
Added to platform:
Maintenance Services
Item Id: CKH34
Perform thrust reverser rigging check, actuator and proximity indication verification, hydraulic leak check, and operational test.
Added to platform:
Maintenance Services
Item Id: C33UV
Inspect thrust reverser hydraulic isolation valve, verify operation, and support replacement and leak check on Falcon 7X.
Added to platform:
Testing & Certification
Item Id: H3RWU
Qualified technical support required for Hawker windshield heat failure.
Added to platform:
Maintenance Services
Item Id: WA7AF
Qualified technical support required for Hawker windshield heat failure.
Added to platform:
Logistics & Customs
Item Id: AEQ3G
Qualified technical support required for Hawker windshield heat failure.
Added to platform:
Maintenance Services
Item Id: EQKQW
Avionics DU removal and replacement, wiring inspection, software load and configuration verification, and operational test for Phenom 300 PFD failure.
Added to platform:
Maintenance Services
Item Id: PHC3A
Provide an FAA A&P mechanic with PW1100G-JM experience for FOHE replacement, oil servicing, leak check, and engine run.
Added to platform:
GSE & Ramp Services
Item Id: 7PARV
Provide run-up area coordination, fire guard, and oil servicing cart for the post-maintenance leak check run.
Added to platform:
Maintenance Services
Item Id: U3AFF
Qualified avionics technician to remove and replace ADIRU/IRS as required, perform wiring checks, dual-channel alignment, BITE, and operational test for return to service.
Added to platform:
Logistics & Customs
Item Id: 3UTEF
On-board courier for flight-critical part; provider must state availability, location, qualifications, and estimated response time.
Added to platform:
Testing & Certification
Item Id: UUTCT
Perform borescope inspection of the number 2 engine booster and HPC stages 1 to 3 after bird ingestion, with recorded images and a findings report per CFM56-7B AMM limits.
Added to platform:
Maintenance Services
Item Id: JYGEQ
Provide an EASA B1 licensed engineer with CFM56-7B experience for fan blade replacement, trim balance if required, engine run, and certificate of release to service.
Added to platform:
Testing & Certification
Item Id: 9R3TK
Qualified technical support required for Bell 206 fuel-control fault.
Added to platform:
Maintenance Services
Item Id: RWN3K
Qualified technical support required for Bell 206 fuel-control fault.
Added to platform:
Maintenance Services
Item Id: FWRK7
Qualified technical support required for H125 rotor vibration.
Added to platform:
Maintenance Services
Item Id: C9CMA
Provide an FAA A&P technician with 737NG avionics experience for ADIRU removal and installation, connector inspection, IRS alignment, and return-to-service checks.
Added to platform:
Testing & Certification
Item Id: GAV4D
Bench check the removed ADIRU, document fault findings, and return with FAA Form 8130-3 or report findings for repair quote.
Added to platform:
Logistics & Customs
Item Id: PCQW4
Arrange next-flight-out transport of the replacement ADIRU to KSTL with priority handling, live tracking, and tail-side delivery to Gate E28.
Added to platform:
Maintenance Services
Item Id: MAJJP
Provide two FAA A&P mechanics with A320 family experience for slat removal, track replacement, rigging, and functional checks.
Added to platform:
Testing & Certification
Item Id: 74PKN
Perform eddy current inspection of slat 3 and 4 main tracks per the SB, with signed reports and findings for engineering disposition.
Added to platform:
Testing & Certification
Item Id: CWK7G
Qualified technical support required for Learjet starter-generator failure.
Added to platform:
Maintenance Services
Item Id: YTGFT
Qualified technical support required for Learjet starter-generator failure.
Added to platform:
Testing & Certification
Item Id: K7D4W
Qualified technical support required for Hawker avionics reliability check.
Added to platform:
Logistics & Customs
Item Id: VWNYG
Qualified technical support required for Hawker avionics reliability check.
Added to platform:
Maintenance Services
Item Id: 3RUAQ
Qualified technical support required for Hawker avionics reliability check.
Added to platform:
Maintenance Services
Item Id: WYGWU
Qualified technical support required for Challenger brake control fault.
Added to platform:
Logistics & Customs
Item Id: 7V7MR
Transatlantic OBC and customs coordination wanted; provider must state availability, location, qualifications, and estimated response time.
Added to platform:
Maintenance Services
Item Id: DRXRR
Provide a 737 MAX 8 powerplant mechanic for number 1 engine starter troubleshooting and replacement, starter air valve inspection, leak check, engine motoring, and return-to-service support.
Added to platform:
GSE & Ramp Services
Item Id: PNYYH
Provide ramp coordination and GSE support for engine motoring, starter and air valve functional checks, leak inspection, and controlled engine run-up after maintenance.
Added to platform:
Maintenance Services
Item Id: 4QWCH
Interior return-to-service inspection wanted; provider must state availability, location, qualifications, and estimated response time.
Added to platform:
GSE & Ramp Services
Item Id: EWNFH
Provide compatible 737-800 tow bar, qualified tug operator, wing walkers, and ramp coordination for aircraft positioning before and after main landing gear exchange.
Added to platform:
Maintenance Services
Item Id: WECTH
Provide a two-person landing gear maintenance crew with 737NG experience to perform gear removal and installation, alignment, functional checks, and maintenance records.
Added to platform:
Testing & Certification
Item Id: HPXD3
Provide qualified NDT technicians and equipment for visual, eddy current, and fluorescent penetrant inspections of removed and installed main landing gear components.
Added to platform:
Maintenance Services
Item Id: 47ATW
Qualified technical support required for H135 tail-rotor gearbox alert.
Added to platform:
Testing & Certification
Item Id: TGTWC
Qualified technical support required for H135 tail-rotor gearbox alert.
Added to platform:
Logistics & Customs
Item Id: KPQYQ
Qualified technical support required for H135 tail-rotor gearbox alert.
Added to platform:
Maintenance Services
Item Id: HWQ4D
Qualified technical support required for Learjet landing-gear scheduled work.
Added to platform:
Testing & Certification
Item Id: TCHWQ
Qualified technical support required for Learjet landing-gear scheduled work.
Added to platform:
Maintenance Services
Item Id: DX9NJ
Two A&P powerplant techs for filter/MCD inspection, component change, leak check and ground run
Added to platform:
Testing & Certification
Item Id: MXCUJ
Spectrographic and particle analysis of oil sample and MCD debris, written report
Added to platform:
Maintenance Services
Item Id: YRGKV
Provide a three-person FAA A&P crew with 737NG experience for APU removal, installation, leak checks, and APU run.
Added to platform:
Logistics & Customs
Item Id: 3PUPF
Arrange next-flight-out transport of the FCC to KSJC with priority handling, tracking, and tail-side delivery.
Added to platform:
Maintenance Services
Item Id: 9FJA9
Provide a 737 MAX avionics technician for FCC removal and installation, software load, autopilot and stab trim operational checks.
Added to platform:
GSE & Ramp Services
Item Id: 4D4KM
Mobile GSE package wanted; provider must state availability, location, qualifications, and estimated response time.
Added to platform:
Maintenance Services
Item Id: MYKM3
Provide an EASA Part-66 B2 licensed technician with 777 type rating for TCAS computer and antenna replacement, bonding check, TCAS self-check, and CRS issue.
Added to platform:
Logistics & Customs
Item Id: PNRVC
Arrange expedited next-flight-out transport from supplier to KLAS, including priority handling, tracking, customs coordination as required, and direct delivery to the maintenance facility.
Added to platform:
Maintenance Services
Item Id: PRCKN
Provide a 737 MAX 8 avionics technician for captain-side display electronics removal and installation, wiring inspection, and return-to-service display test.
Added to platform:
Testing & Certification
Item Id: WWDMA
Perform eddy current and detailed visual inspection of wing to fuselage attach fittings per the C-check task cards, with signed reports.
Added to platform:
Maintenance Services
Item Id: VV3NQ
Provide four EASA B1 licensed mechanics with ERJ-190 type rating for day and night shifts across the eight-day C-check.
Added to platform:
Testing & Certification
Item Id: V9DVG
Perform SB borescope inspection of HPT stage 1 blades on both GEnx-1B engines with image capture and a findings report formatted for GE disposition.
Added to platform:
Maintenance Services
Item Id: MPJEM
Provide two EASA B1 technicians with 787 GEnx type rating for engine access, core turning, cowl closure, and CRS.
Added to platform:
Testing & Certification
Item Id: KWMP9
Composite NDT inspection support wanted; provider must state availability, location, qualifications, and estimated response time.
Added to platform:
Maintenance Services
Item Id: ERTP4
Qualified technical support required for Challenger corrosion inspection.
Added to platform:
Testing & Certification
Item Id: JYNN9
Qualified technical support required for Challenger corrosion inspection.
Added to platform:
Maintenance Services
Item Id: ART4M
Qualified technical support required for Phenom engine trend inspection.
Added to platform:
Maintenance Services
Item Id: HRYGK
Need Gulfstream-experienced A&P (prefer G550) at KCAG for fault isolation of rudder restriction. No parts identified yet. Provide troubleshooting labor, tooling, and recommended corrective action / parts after diagnosis. On-site KCAG ASAP / within next 24h Zulu; Hangar or Ramp.
Added to platform:
Maintenance Services
Item Id: XRNMU
Remove/install transponder, run BITE and ADS-B out compliance check, sign RTS at KHOU
Added to platform: